Filter
Top Products
Page 4
Idle Mode
1. While the vehicle is running with key, press button #3.
2. The park lights will turn on and the siren will chirp once.
3. Turn the ignition key off and the vehicle will continue to run.
4. Exit the vehicle and leave it running safely without leaving the
keys in the Ignition.
Note: Always lock the doors while the vehicle is left running
unattended. The vehicle will stay running for the
programmed runtime (Default 15 minutes)
Turbo Timer Mode
Status Update
1.While the vehicle is running with key, press button #4.
2.The park lights will turn on and the siren will chirp once.
3.Turn the ignition key off and the vehicle will continue to run for
approximately 2 minutes.
Note: Always lock the doors while the vehicle is left running
unattended.
This feature is used to check the status of the vehicle. If the
system does not update the remote after completing a function
press Button #4 on the transmitter. The remote will then display the
current status of the system on the LCD screen.
If the system is out of operating range the remote transmitter will
beep three times quicky after a button is pressed. The antenna icon
on the top of the LCD will be gone or show no bars next to the icon.
1
2
3
4
1
2
3
4
1
2
3
4
OWNER’S GUIDE
2way REMOTE STARTER/ ALARM