Filter
Top Products
G
ELECTRICAL
G - 7
12-VOLT INTERIOR
Distribution Panel, USA
The kill switch, 12-volt distribution panel, and converter are located under the front
sofa on most rear bed models. Open the drawer under the sofa seat and look on the
roadside of the storage area. The kill switch and distribution panel are mounted on a
hinged panel that lowers to access the converter. On trailers without a front sofa the
12-volt distribution panel and the kill switch is located under the computer table. The
converter is located on the roadside front wall and can be accessed by removing
cabinet drawers.
On front bed models the electronic kill switch is located on the galley by the main door.
The converter, is located on the front of the pantry cabinet. The 12-volt distribution
panel and 110-volt beakers are accessed by opening the converter‘s brown decorative
door.
Manual reset breakers protect all the 12-volt circuits. If a breaker trips, an audible click
may be heard, and the 12-volt power supply to certain systems will be cut off. The
protruding reset button can help identify the questionable breaker.
Reset the breaker by depressing the small rectangular button on the end of the breaker.
If the breaker trips a second time, try shutting off an item on that circuit. If the breaker
continues to trip the system affected should be checked by a qualified service center.
Canadian panels have automotive type fuses.