Filter
Top Products
D
D - 15
EXTERIOR
Customers replacing original equipment that has not been tested for compatibil-
ity must ensure the replacements are compatible to the hub and drum assembly
installed. Such elements of compatibility include, but are not limited to:
· Diameter of the hub-mounting surface.
· Stud length and diameter.
· Location and number of studs.
· Center hold diameter for the wheel.
· Wheel mounting offset from the rim center.
· Rated capacity of the wheel.
· Wheel fastener torque.
· Wheel nut size and shape.
Impact of any added wheel accessories (such as decorative center caps) that could
affect proper seating of the wheel to the hub surface.
Certain tests are recommended by the manufacturer’s of factory installed equipment,
such as the cornering fatigue test based on SAE J1095/SAE J267 and field tests,
are recommended for all wheels and rims to be installed in place of original factory
equipment. Contact the wheel manufacturer to verify compatibility with the factory
installed equipment prior to replacement.