Filter
Top Products
AT Commands
78 Cingular GPRS Raven User Guide Version 2.01
Time and Date in the Raven is set to UTC (Coordinated Universal Time) and then
adjusted for local time (i.e. California is UTC-8 and New York is UTC-5). Time is
expressed in 24-hour format,
i.e. 13:23:57 would be 1:23pm. You can set time and
date manually or you can have it set automatically with a regular query to an Inter
-
net time server (such as time.nist.gov) using SNTP (Simple Network Time Proto-
col).
The Raven allows several different levels of logging.
TABLE 9. Time and Date
Command Parameters Details
*DATE=[mm/dd/
yyyy],[hh:mm:ss]
mm/dd/yyyy =
month, day, year
hh:mm:ss =
time in 24-hour
notation
Sets and queries the clock in the unit. Either the date and
time can be specified, or simply one of the two can be
specified in which case the unspecified value will remain
unchanged. The date and time are always specified 24-
hour notation.
Note: The GPS will be used to set the time, in which
case any date/time specified will be ignored.
*SNTP=n
n=0
n=1
Enables daily SNTP update of the system time.
Off
On.
*SNTPADDR=
[d.d.d.d][name]
d.d.d.d=IP
name=domain
name
SNTP Server IP address, or fully-qualified domain
name, to use if *SNTP=1.
Note: If blank, time.nist.gov is used.
*SNTPQUERY? none The current SNTP time and date.
TABLE 10. Logging
Command Parameters Details
*DBGCOM1000=n
n=0
n=1
Turn on debugging for COM1000.
No logging
Logging