Filter
Top Products
Next, configure the Auxiliary port.
1. Click on the Tool Box Icon drop arrow.
2. Select Options.
3. Click Right arrow until AUX tab appears in the bottom of the screen.
4. Click AUX. Set port COM port as shown.
You will need to configure the Bluetooth™ adapters if you are using Bluetooth™
serial port communication in your environment. Several third party Bluetooth™
serial port adapters that support serial port profile are available in the market.
One example of such a Bluetooth™ adapter that we have tested is SENA Promi-
SD 101/202 with internal rechargeable battery. Currently, the 3M™ Dynatel™
Locator does not supply the power to the external Bluetooth™ adapter.
Establish Bluetooth communication to GPS unit.
1. Select the connection icon
2. Bluetooth Manager
3. Select a Bluetooth icon (double
click) either one, at this point.
4. Icon will show double green
arrows when connected.
Figure 8. Selecting GPS COM port in ArcPad™ Application
Figure 9. Configuring Bluetooth Serial port on the GPS device
14