31
Kiosk Modifications of the OLE for Retail POS
General Information
11/25/2013 OPOS Driver User Guide P1061668-001 Rev. A
Print Line Characteristics that are reset at the end of each print method or by a “Normal”
sequence.
Table 11 • Print Line Data Characters and Escape Sequences
Name Data Remarks
Zebra Kiosk
Printer Supported
Bold ESC |(!)bC Prints in bold or double-strike. If ‘!’
is specified then bold is disabled,
YES
Underline ESC |#uC Prints with underline. The character
‘#’ is replaced by an ASCII decimal
string telling the thickness of the
underline in printer dot units. If ‘#’ is
omitted, then a printer-specific
default thickness is used.
YES
Italic ESC |(!)iC Prints in italics. If ‘!’ is specified
then italic is disabled.
YES
Alternate color
(Custom)
ESC |#rC Prints using an alternate custom
color. The character ‘#’ is replaced
by an ASCII decimal string
indicating the desired color. The
value of the decimal string is equal
to the value of the cartridge constant
used in the printer device properties.
If ‘#’ is omitted, then the secondary
color (Custom Color 1) is selected.
Custom Color 1 is usually red.
NO
Reverse video ESC |(!)rvC Prints in a reverse video format. If ‘!’
is specified then reverse video is
disabled.
YES
Shading ESC |#sC Prints in a shaded manner. The
character ‘#’ is replaced by an ASCII
decimal string telling the percentage
shading desired. If ‘#’ is omitted,
then a printer-specific default level
of shading is used.
NO
Single high & wide ESC |1C Prints normal size. YES
Double wide ESC |2C Prints double-wide characters. YES, can co-exist with
normal characters on the
line
Double high ESC |3C Prints double-high characters. YES, can co-exist with
normal characters on the
line
Double high & wide ESC |4C Prints double-high/double-wide
characters.
YES, can co-exist with
normal characters on the
line
