E-8
This section explains how to turn on this system and select
input sources. Before turning on this system, turn on the
external audio unit to be used.
1
Turn the MASTER VOLUME control fully
counterclockwise to decrease the volume to
minimum.
2
Turn on this system.
3
Select the appropriate input mode by pressing the
INPUT selector button.
* The indicator for the selected input mode lights up.
* Refer to the “Controls & connectors” on page 4 for
details about the input modes.
4
Play s source on the external unit.
5
Adjust the volume to the desired level.
6
As you prefer, select a surround mode.
* Refer to the “Controls & connectors” on page 4 for
details about the surround modes.
Playing a source
This procedure lets you adjust the sound output level
balance between the front, center, surround speakers and
the subwoofer by using the built-in test tone generator.
Make this adjustment so that each speaker output level
becomes almost the same when heard at the listening
position. This is important for high performance of the built-
in DTS decoder and Dolby Digital decoder.
* Once you have completed this adjustment, you can
adjust the overall volume level of this system only by
using the MASTER VOLUME control.
1
Set the SPEAKER MODE switch to “5CH” if it is set
to another position.
2
Turn the MASTER VOLUME control fully
counterclockwise to decrease the volume to
minimum.
3
Turn on this system.
4
Set the CENTER, SURROUND and SUBWOOFER
level controls at the center position.
5
Press the TEST button.
6
Adjust the master volume to the desired level.
* You will hear a test tone (like pink noise) from respective
speakers for about two seconds in the following order:
front speakers, center speaker, surround speakers and
subwoofer .
7
Adjust the CENTER, SURROUND and
SUBWOOFER level controls while listening a series
of test tones so that their levels become almost the
same with the front speakers’ level.
8
When the adjustment is completed, press the TEST
button.
* The test tone stops .
Adjusting speaker balance
CENTER
SURROUND
SUBWOOFER
DIGITAL
4CH
2CH
DTS
DIGITAL
CENTER
SURROUND
SUBWOOFER
PROLOGIC
INPUT
MODE
MUTE
TEST
MASTER VOLUME
Active Servo
Technology
HOME THEATER SOUND SYSTEM
TSS-1
3
6
2
1, 5
SPEAKER
OUTPUTS
DIGITAL
INPUTS
OPTICAL
COAXIAL
ANALOG
INPUTS
FRONT
SURROUND
SPEAKER
MODE
5CH
4CH
2CH
L
R
FRONT
L
R
1
2
SURROUND
CENTER
S. WOOFER
DC IN 15V
DIGITAL
4CH
2CH
DTS
DIGITAL
CENTER
SURROUND
SUBWOOFER
PROLOGIC
INPUT
MODE
MUTE
TEST
MASTER VOLUME
Active Servo
Technology
HOME THEATER SOUND SYSTEM
TSS-1
4, 7
5, 8
2, 6
3
1
SR601ENG(9/29)e 00.9.29, 2:34 PM8
