Operating Instructions Teledyne API Model T360/T360M Operation Manual
90
4.7.2.8. NUMBER OF RECORDS
Although the DAS can capture several months worth of data, the number of data
records in the T360 is limited by the total number of parameters and channels and
other settings in the DAS configuration. Every additional data channel,
parameter, number of samples setting etc. will reduce the maximum amount of
data points somewhat. In general, however, the maximum data capacity is
divided amongst all channels (max: 20) and parameters (max: 50 per channel).
The DAS will check the amount of available data space and prevent the user from
specifying too many records at any given point. If, for example, the DAS
memory space can accommodate 375 more data records, the ENTR key will
disappear when trying to specify more tha That number of records. This check
for memory space may also make an upload of a DAS configuration with
APICOM or a Terminal program fail, if the combined number of records would
be exceeded. In this case, it is suggested to either try from the front panel what
the maximum number of records can be or use trial-and-error in designing the
DAS script or calculate the number of records using the DAS or APICOM
manuals. To set the number of records for one channel from the front panel,
press SETUP-DAS-EDIT-ENTR and the following touchscreen button sequence.
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 1 2, 900
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X NUMBER OF RECORDS:00
<SET SET> EDIT PRINT EXIT
SETUP X.X REPORT PERIODD:DAYS:0
0 0 0 0 0 ENTR EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
Toggle buttons to set
number of records
(1-99999)
SETUP X.X EDIT RECOPRDS (DELET DATA)
YES NO
NO returns to the
previous menu.
YES will delete all data
in this channel.
Press SET> key until…
From the DATA ACQUISITION menu
(see Section 6.12.2.2)
