50 Chapter 5, Simulation and Burning
To burn the tutorial project to disc:
1 Do one of the following:
• If the tutorial project is not open, choose File > Open or press Ctrl+O. In the
Open dialog box, locate and select the tutorial project and click Open.
• If the tutorial project is already open, choose File > Save or press Ctrl+S to
save the project.
2 Insert a blank disc into your DVD recorder and choose Burn > Burn DVD or
press Ctrl+B. The Burn to DVD dialog box opens.
3 Leave the Burn From menu set to Current Project.
4 If necessary, set the Device menu to your DVD recorder.
5 Set the Write Speed for the device.
6 To write multiple copies of the disc, enter a value in the Copies field.
7 Click OK to burn the DVD disc. If creating multiple copies of the disc, you are
prompted to insert a new disc as each is completed.
