A SERVICE OF

logo

Setting Up Your 2000i 17
3. Plug the other end of the cable into the S-video IN connector on the projector.
4. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the DVD player to the two Auxiliary Audio IN jacks on the rear of
the 2000i. Keep your right and left channel connections correct for stereo sound.
NOTE: You can’t connect the audio cables from both the VCR and a DVD player to the
Connection Panel. The panel can accommodate only one external audio source at a time.
However, you can link the audio connections of the DVD player and VCR as described on
page 18.
5. Connect the power cable to an available outlet or power bar (not supplied).
6. Turn on the projector.
7. Press the VCR/DVD Player button on the control panel.
S-video IN
S-video Cable
from DVD
Player
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Connect red and white RCA
audio cables here
VCR/DVD Player Button