8 About the 2000i
Use the source buttons to switch the video and audio sources for the projector and cabinet audio
amplifier. Please note that switching sources takes a few seconds, and all buttons on the control
panel are disabled during that time.
Source Buttons
Button Source
VCR/DVD player
If both a VCR (composite RCA connection) and a DVD player (S-video
connection) are connected to the projector, press this button to switch between
the two display sources. Note there is a three-second delay before the alternate
display source appears. If you switch to another source (such as the internal
computer) and then press this button, the last active video source is displayed.
Internal computer
Notebook software. The internal computer source must be active. For
information on using Notebook software, see page 40.
Press this button and hold it down for three seconds to open the Floating Tools.
For information on using the Floating Tools, see page 40.
Guest laptop
NOTE: You can switch to a connected guest laptop only if your system includes
the optional X-Port 20 switch option.
