1.1 General Features
Feature Manual 41
Programming Manual References
[PT Programming]
[104] SLT Hold Mode
[115] Extension Ring Tone Pattern
[423] CO Line Ring Tone Pattern
[PC Programming]
9.1.11 Detail [1-10]—Extension—Ring Tone Pattern, Single Line Telephone—Hold Mode
9.2.2 Feature settings [2-2]—Call Waiting—intercom calls, Call Waiting—outside calls
9.2.3 PT personal settings [2-3]—Call Waiting Tone Type
9.3.3 Detail [3-3]—Ring Tone Pattern
Feature Manual References
1.1.9 Busy Station Signaling (BSS)
1.1.37 Data Line Security
2.2.1 Tones/Ring Tones
Operating Manual References
1.3.28 Call Waiting
3.1.2 Personal Feature Assignment—Call Waiting Tone Type Selection
1.1.28 Call Waiting Caller ID
Description
While a proprietary telephone (PT) user hears the call waiting tone supplied by the telephone company, the
Caller ID information will flash on the display for a preprogrammed time period ( [908] Call Waiting Caller
ID Time), if this feature is enabled for the outside (CO) line ( [913] Call Waiting Caller ID Assignment).
The user can answer the second call by disconnecting the current call or placing it on hold.
This feature is also known as Visual Caller ID.
Conditions
• Hardware Requirement: An optional Caller ID card for outside (CO) lines 4–8.
• If the PT user does not press the FLASH/RECALL button while the information is displayed (flashing),
the Caller ID information is automatically recorded in the user's personal area and the user's Caller ID
Indication—Personal button lights if the call has been directed to the user ( 1.1.18 Call Log,
Incoming). A call via an outside (CO) line programmed as "Normal" ( [414-416] CO Line Mode—Day/
Night/Lunch) is automatically recorded in the common area and all corresponding user's Caller ID
Indication—Common buttons light. However in this case, if a Caller ID Indication—Common button is
not assigned to any PT,
– The call will be logged in the personal area of the PT that hears the call waiting tone, if a Caller ID
Indication—Personal button is assigned to that PT.
– If the PT that hears the call waiting tone does not have a Caller ID Indication—Personal button
assigned to it, the call will be logged in the personal area of the PT of the lowest-numbered jack,
and its Caller ID Indication—Personal button light will turn red.
• This feature will not function when the extension:
