1.1 General Features
22 Feature Manual
[Available Destinations]
Conditions
• FWD/DND Button
If a proprietary telephone (PT) does not have an FWD/DND button, a flexible CO button can be
customized as an FWD/DND button.
[Button Status]
The FWD/DND button shows the current status as follows:
• Setting a new FWD mode, such as All Calls or Busy/No Answer, or the DND feature, clears the status
of the previous FWD mode or DND feature.
Programming Manual References
[PT Programming]
[202] Call Forwarding Start Time
[607] Call Forwarding to CO Line
[622] BV for Extension
Destination Availability
Extension (proprietary telephone [PT]/single line
telephone [SLT])
–
Automatic Line Access no. + Phone no. Only available when FWD to Outside (CO) Line is
enabled for the extension through system
programming ( [607] Call Forwarding to CO Line).
Outside (CO) Line Group Access no. + Outside
(CO) Line Group no. + Phone no.
Only available when FWD to Outside (CO) Line is
enabled for the extension through system
programming ( [607] Call Forwarding to CO Line).
Voice Processing System (VPS) –
Built-in Voice Message (BV) feature no. Only available when the BV feature is enabled for the
extension through system programming ( [622] BV
for Extension).
Light Pattern Status
Red on DND on
Slow red flashing FWD on
Off FWD/DND off
Extension
Incoming Intercom Calls/
Outside (CO) Line Calls
1. Another Extension
2. Outside Party
3. VPS
4. BV
Forwarded to:
