A SERVICE OF

logo

1.1 General Features
148 Feature Manual
Code Table(s), and when the leading number of a dialed telephone number (not including the Outside (CO)
Line Access number) matches an entry found in an applicable table, the call is denied.
Up to a total of 80 denied codes, each consisting of up to 11 digits, can be stored.
Exception Code Tables ( [306] TRS—Exception Code)
Exception Code Tables are preprogrammed lists of leading digits or complete telephone numbers that are
checked against every dialed number prohibited by a Denied Code Table. When a dialed number is
prohibited by a Denied Code Table, it is compared to the applicable Exception Code Table(s). If the dialed
number matches an entry found in an applicable Exception Code Table, the call is permitted.
Up to 80 exception codes, each consisting of up to 11 digits, can be stored. The available number of codes
depends on the COS assigned to each extension.
Applicable tables by COS
The Denied Code Tables and Exception Code Tables that apply to each COS are listed below.
TRS for System Speed Dialing ( [301] TRS—System Speed Dialing Class)
Calls made using System Speed Dialing are restricted depending on the COS of System Speed Dialing
numbers and the COS assigned to each extension. If, for example, the COS of System Speed Dialing
numbers is assigned as "2", the PBX will allow System Speed Dialing calls for the extensions with COSs 1
and 2, but not allow System Speed Dialing calls for the extensions with COSs 3, 4, and 5 according to TRS
as follows:
COS No. Denied Code Tables Exception Code Tables
1
No restriction.
(Not Programmable)
No restriction.
(Not Programmable)
2
20 denied codes programmed in [302].
(Table for Class 2)
80 exception codes (code numbers 01–80)
programmed in [306].
(Tables for Classes 2 through 5)
3
40 denied codes programmed in [302] and
[303].
(Tables for Classes 2 and 3)
60 exceptions codes (code numbers 01–60)
programmed in [306].
(Tables for Classes 3 through 5 )
4
60 denied codes programmed in [302]
through [304].
(Tables for Classes 2 through 4)
40 exception codes (code numbers 01–40)
programmed in [306].
(Tables for Classes 4 and 5)
5
80 denied codes programmed in [302]
through [305].
(Tables for Classes 2 through 5)
20 exception codes (code numbers 01–20)
programmed in [306].
(Table for Class 5)
COS 1
COS 2
COS 3
COS 4
COS 5
Class 2 restriction
Class 2 – 3 restrictions
Class 2 – 4 restrictions
Class 2 – 5 restrictions
All outside (CO) line calls permitted.
Class 2 – 5 exceptions
Class 3 – 5 exceptions
Class 4 – 5 exceptions
Class 5 exception
Calls are restricted Calls are permitted