Multicast Routing Commands
4-309
4
ip pim max-graft-retries
This command configures the maximum number of times to resend a Graft message
if it has not been acknowledged. Use the no form to restore the default value.
Syntax
ip pim max-graft-retries retries
no ip pim graft-retry-interval
retries - The maximum number of times to resend a Graft.
(Range: 0-65535)
Default Setting
2
Command Mode
Interface Configuration (VLAN)
Example
show router pim
This command displays the global PIM configuration settings.
Command Mode
Normal Exec, Privileged Exec
Example
show ip pim interface
This command displays information about interfaces configured for PIM.
Syntax
show ip pim interface vlan-id
vlan-id - VLAN ID (Range: 1-4094)
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the PIM settings for the specified interface as
described in the preceding pages. It also shows the address of the designated
PIM router and the number of neighboring PIM routers.
Console(config-if)#ip pim max-graft-retries 5
Console(config-if)#
Console#show router pim
Admin Status: Enabled
Console#
