Configuring the Switch
3-176
3
Configuring a Host Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for “Host.” Enter the IP address, subnet mask, and
hardware address for the client device. Configure the optional parameters such as
gateway server and DNS server. Then click Apply.
Figure 3-106 DHCP Server Pool - Host Configuration
CLI
– This example configures a host address pool.
Console(config)#ip dhcp pool mgr 4-131
Console(config-dhcp)#host 10.1.0.19 255.255.255.0 4-137
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet 4-139
Console(config-dhcp)#client-identifier text bear 4-138
Console(config-dhcp)#default-router 10.1.0.253 4-133
Console(config-dhcp)#dns-server 10.2.3.4 4-134
Console(config-dhcp)#netbios-name-server 10.1.0.33 4-135
Console(config-dhcp)#netbios-node-type hybrid 4-136
Console(config-dhcp)#domain-name example.com 4-133
Console(config-dhcp)#bootfile wme.bat 4-135
Console(config-dhcp)#next-server 10.1.0.21 4-134
Console(config-dhcp)#lease infinite 4-136
Console(config-dhcp)#
