Multicast Filtering
3-155
3
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown below.)
Figure 3-92 IGMP Configuration
CLI – This example modifies the settings for multicast filtering, and then displays the
current status.
Console(config)#ip igmp snooping 4-221
Console(config)#ip igmp snooping querier 4-224
Console(config)#ip igmp snooping query-count 10 4-224
Console(config)#ip igmp snooping query-interval 100 4-225
Console(config)#ip igmp snooping query-max-response-time 20 4-226
Console(config)#ip igmp snooping query-time-out 300 4-226
Console(config)#ip igmp snooping version 2 4-222
Console(config)#exit
Console#show ip igmp snooping 4-222
Service status : Enabled
Querier status : Enabled
Query count : 10
Query interval : 100 sec
Query max response time : 20 sec
Router port expire time: 300 sec
IGMP snooping version : Version 2
Console#
