![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/98/f98844ba-4f47-47a1-ae8e-bd369fe8f371/f98844ba-4f47-47a1-ae8e-bd369fe8f371-bg9.png)
9
ASSEMBLY
F
M0412a-0920
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
WARNING
1
• Position the vehicle body on top of the vehicle frame.
• Fit motor harness connector up through the large
rectangular opening in the vehicle body.
• Fit the high speed hook-up connector through the square
opening near the front of the vehicle body.
Square
Opening
Motor
Harness
Connector
Vehicle Frame
Vehicle
Body
Large Rectangular
Opening
High Speed
Hook-Up
• Insert four #8 x
3
/4" screws through the vehicle body and into
the vehicle frame. Make sure the holes in the vehicle body and
frame are aligned.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Vehicle
Frame
Vehicle
Body
2
• Fit the motor harness between the vehicle body tabs.
Motor
Harness
Tab
Tab
Top View
3
Left Side View