A SERVICE OF

logo

Open as PDF
next previous
18
ASSEMBLY
F
T
M
40
T
M
39
38
M0412a-0920
ASSEMBLY
F
• Balance the sound box on the vehicle body. (The speaker should
face down.)
• Fit the tabs at the bottom of the tank under the front end of the
vehicle body.
• Lower the tank on the vehicle frame, making sure that the two
small square openings in the tank fit over the buttons on the
sound box.
Tabs
Tank
Right Side View
• Fit the tab on the front of the seat into the slot near the tank.
• Push down firmly near the back of the seat to “snap” it to
the vehicle.
Hint: You will need to remove the seat to access the high speed
connectors and to charge the 12 volt battery. To remove the seat,
press the tab at the back of the seat and lift.
Slot
Seat Tab
Seat Tab
PUSH
HERE
• Insert a #8 x ¾" screw through the hole in each side of the tank
and tighten.
Tank
Vehicle
Frame
41
• Fit the tachometer cover onto the tachometer housing. The
tab on the tachometer cover should fit into the notch in the
tachometer housing.
• Insert a #8 x ¾" screw into the tachometer cover and tighten.
Tachometer
Housing
Tab
Notch
Tachometer
Cover
Tachometer
Cover