A SERVICE OF

logo

M0412a-0920
19
18
20
13
ASSEMBLY
F
M0412a-0920
• Fit the headlight lens onto the headlight housing.
• Insert three #8 x
3
/4" screws into the headlight lens and tighten.
Headlight
Lens
Headlight
Housing
Front Fork
Lower Hole
Lower Hole
Front Fork
Cover
• Fit the front fork into the front fork cover.
• Insert two #8 x ½" screws into the lower holes in the front fork
and tighten.
Headlight
Assembly
Center
Holes
Front Fork
Assembly
• Position the headlight assembly with the lens down on a
flat surface.
• Fit the front fork assembly onto the back of the headlight
assembly, as shown.
• Insert two #8 x ¾" screws through the center holes in the front
fork assembly and into the headlight assembly.
• Tighten the screws.
21
Wire Cover
Switch
• Fit the wrapped portion of the handlebar harness into the
wire cover.
• Fit the tab on the wire cover into the notch in the switch to lock
the two parts together.
Handlebar
Harness
Wire
Cover
Tab
Switch
Notch