16
32
TM
31
30
M0412a-0920
ASSEMBLY
F
• Align the screw holes in each handlebar with the screw holes in
the front fork.
• First, insert two #8 x ¾" screws through the lower holes in the
front fork and into each lower hole in each handlebar
A
and
hand tighten. Do not tighten the screws completely. These screws
will be tightened in step 50.
• Next, insert two #8 x ¾" screws through the upper holes in the
front fork and into each upper hole in each handlebar
B
and
hand tighten. Do not tighten the screws completely. These screws
will be tightened in step 50.
Handlebars
Handlebar
Harness
A
B
• Fit the handlebar harness plug up
through the rectangular opening
in the vehicle body.
Handlebar
Harness Plug
Rectangular Opening
T
M
Handlebar
Harness Plug
Rectangular Opening
Right Side View
See
Inset
T
M
Tab
Handlebar
Harness
• Fit the handlebar harness behind the
tab in the vehicle frame neck.
Tab
Handlebar
Harness
Front View
See
Inset
T
M
33
• Fit the remaining steering bushing onto the top of the vehicle
frame neck.
• Insert two #8 x ¾" screws into each end of the steering
bushing and tighten.
Steering
Bushing
