A SERVICE OF

logo

Open as PDF
next previous
Figure l-10. Connecting the printer and computer
6
Connecting the Printer to Your Computer
To connect the SQ-2000 to your computer, you’ll need either a
parallel or serial interface cable, depending on your computer.
Refer to the manual for your computer or check with your dealer
for the proper cable.
First, make sure both the computer and printer are turned
OFF. Next, plug one end of the cable into the computer and the
other end into the connector on the interface card.
If the cable comes with a grounding wire, attach it to the
grounding screws next to the sockets of both machines as shown.
Connect the wire clips (or screws) to secure the plugs to their
sockets.
13