A SERVICE OF

logo

Miscellaneous Commands (continued)
Function:
Select printer
Format:
ASCII
<DCl>
Decimal
17
Hexadecimal 11
Remarks:
Returns the SQ-2000 to an on-line state. It enables the printer
to receive data again after it has been deactivated by a deselect
printer code. This code will not override the ON LINE button.
Function:
Set specified data to repeat printing
Format:
ASCII
<ESC> “V” n data <ESC> “V” <NUL>
Decimal
27
86 n data 27 86 0
Hexadecimal 1B
56 n data 1B 56 00
Remarks:
This command sequence will repeat data n times. This se-
quence can be nested up to five times, and the data string can
contain up to 2K characters. DIP switch l-l must be in the
down position to use this command sequence.
Function:
Set eighth-bit
Format:
ASCII
<ESC>
">”
Decimal
27
62
Hexadecimal 1B 3E
Remarks:
Sets the eighth data bit to 1.
A-21