A SERVICE OF

logo

5. Use a screwdriver to remove the screws securing the
interface shield plate; remove the shield plate.
6. Slide the interface card into the grooves in the interface slot.
Push it in firmly to make sure it connects to the printer’s
internal socket.
7. Secure the interface with the screws provided with the card.
8. Plug the connector cable into the interface card as shown.
D-4-16-A
D-4-16-B
D-4-17
6
R
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
Using Printer Options 6-37