A SERVICE OF

logo

Open as PDF
next previous
3. Tilt the tractor forward so that its pins rest on the metal
frame of the printer.
4. Load paper onto the rear tractor as described beginning
on page 3-10, steps 3 through 11.
5. Open the paper bail by lifting the tab on its right side.
Then tilt the pull tractor back until the rear latches click
into place over the printer’s rear mounting pins.
6. Turn on the printer, and use the LF/FF Load button to
advance the paper to the pull tractor.
Now follow steps 4 through 11 starting on page 6-6.
D-4-11-A
4-5-11
L
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
6-10 Using Printer Options