A SERVICE OF

logo

Removing the pull tractor
To remove the pull tractor you’ll need a cross-head screwdriver
and the paper separator that was originally installed on the
printer.
1. Remove any paper installed on the tractor and turn off the
printer.
2. Open the top cover and locate the levers that lock the pull
tractor in place on the printer. Pull these levers forward to
release the pull tractor. Then lift the tractor up and out of
the printer.
3. Close the printer’s top cover and open the paper separator
cover.
D-4-12
5-30-B
6
R
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
Using Printer Options 6-11