A SERVICE OF

logo

3.2.5.5 CR Motor Removal
1. Remove the printer mechanism (see Section 3.2.4).
2. Release the timing belt (see section 3.2.5.2).
3. Remove the 3 screws securing the CR motor to the upper frame, and then remove the CR
motor.
3.2.5.6 PF Motor Removal
1. Remove the printer mechanism (see Section 3.2.4).
2.
Remove the 2 CBN (M3×6) screws and then remove the PF motor.
CR Motor
Screws
Figure 3-15. CR Motor Removal
CBS (M3x6)
PF Motor
Figure 3-16. PF Motor Removal
Stylus Pro XL Disassembly and Assmbly
REV.-A 3-15