210 Adding and Replacing Parts
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page 156) before working inside the
computer.
1
Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2
Remove the hard drive (see "Removing the Hard Drive" on page 159).
3
Remove the optical drive (see "Optical Drive" on page 158).
4
Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
5
Remove the keyboard (see "Keyboard" on page 174).
6
Remove the display assembly (see "Replacing the Display Assembly" on
page 179).
7
Remove the palm rest (see "Removing the Palm Rest" on page 193).
8
Disconnect the ExpressCard connector from the system board.
2
3
4
1
book.book Page 210 Wednesday, August 13, 2008 12:12 PM
