PowerConnect B-Series FCX Configuration Guide 671
53-1002266-01
Displaying IGMP snooping information
22
This interface is non-Querier (passive)
default V2
group: 226.6.6.6, life = 260
group: 228.8.8.8, life = 260
group: 230.0.0.0, life = 260
group: 224.4.4.4, life = 260
2/1/24 has 2 groups,
This interface is non-Querier (passive)
Querier is 5.5.5.5
Age is 0
Max response time is 100
default V2
**** Warning! has V3 (age=0) nbrs
group: 234.4.4.4, life = 260
group: 226.6.6.6, life = 260
3/1/1 has 4 groups,
This interface is non-Querier (passive)
default V2
group: 238.8.8.8, life = 260
group: 228.8.8.8, life = 260
group: 230.0.0.0, life = 260
group: 224.4.4.4, life = 260
3/1/4 has 1 groups,
This interface is non-Querier (passive)
Querier is 8.8.8.8
Age is 0
Max response time is 100
default V2
**** Warning! has V3 (age=0) nbrs
group: 236.6.6.6, life = 260
Clear IGMP snooping commands
The clear IGMP snooping commands must be used only in troubleshooting conditions, or to recover
from errors.
Clear IGMP counters on VLANs
To clear IGMP snooping on error and traffic counters for all VLANs, enter the following command.
PowerConnect# clear ip multicast counters
Syntax: clear ip multicast counters
Clear IGMP mcache
To clear the mcache on all VLANs, enter the following command.
PowerConnect# clear ip multicast mcache
Syntax: clear ip multicast mcache
