1412 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Syslog messages
41
Notification OSPF virtual intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
An OSPF interface on the Dell
PowerConnect device has retransmitted a
Link State Advertisement (LSA).
The <router-id> is the router ID of the Dell
PowerConnect device.
The <ip-addr> is the IP address of the
interface on the Dell PowerConnect device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF virtual intf state changed,
rid <router-id>, area <area-id>,
nbr <ip-addr>, state <ospf-state>
Indicates that the state of an OSPF virtual
routing interface has changed.
The <router-id> is the router ID of the router
the interface is on.
The <area-id> is the area the interface is in.
The <ip-addr> is the IP address of the OSPF
neighbor.
The <ospf-state> indicates the state to
which the interface has changed and can
be one of the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
TABLE 239 Syslog messages (Continued)
Message level Message Explanation
