A SERVICE OF

logo

478 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Configuring super aggregated VLANs
13
FIGURE 101 Conceptual model of the super aggregated VLAN application
Each client connected to the edge device is in its own port-based VLAN, which is like an ATM
channel. All the clients’ VLANs are aggregated by the edge device into a single VLAN for connection
to the core. The single VLAN that aggregates the clients’ VLANs is like an ATM path.
The device that aggregates the VLANs forwards the aggregated VLAN traffic through the core. The
core can consist of multiple devices that forward the aggregated VLAN traffic. The edge device at
the other end of the core separates the aggregated VLANs into the individual client VLANs before
forwarding the traffic. The edge devices forward the individual client traffic to the clients. For the
clients’ perspective, the channel is a direct point-to-point link.
Figure 102 shows an example application that uses aggregated VLANs. This configuration includes
the client connections shown in Figure 101.
Client 1
Client 3
Client 5
...
...
Client 1
192.168.1.69/24
Path =
Channel =
sub-net
192.168.1.0/24
a client VLAN nested
inside a Path
a single VLAN into which
client VLANs are aggregated