A SERVICE OF

logo

Open as PDF
next previous
Configuring Switch Information 403
Configuring Unregistered Multicast with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Unregistered Multicast
on the device:
The following is an example of the CLI commands:
Table 7-44. Unregistered Multicast CLI Commands
CLI Command Description
bridge multicast unregistered Configures the forwarding state of unregistered multicast
addresses.
show bridge multicast unregistered Displays the unregistered multicast filtering configuration.
Console # show bridge multicast unregistered
Port Unregistered
---- -------------
1/1 Forward
1/2 Filter
1/3 Filter