A SERVICE OF

logo

Open as PDF
next previous
338 Configuring Switch Information
•
Designated Port ID
— The ID of the selected interface.
•
Designated Cost
— Cost of the port participating in the STP topology. Ports with a lower cost are less
likely to be blocked if STP detects loops.
•
Forward Transitions
— Number of times the
LAG State
has changed from the
Forwarding
state to a
Blocking state
.
Modifying the LAG STP Parameters
1
Open the
Spanning Tree LAG Settings
page.
2
Select a LAG from the
Select a LAG
drop-down menu.
3
Modify the fields as desired.
4
Click
Apply Changes
.
The STP LAG parameters are modified, and the device is updated.
Displaying the STP LAG Table
1
Open the
STP LAG Settings
page.
2
Click
Show All
.
The
STP LAG Table
opens.
Figure 7-39. STP LAG Table