A SERVICE OF

logo

Open as PDF
next previous
226 Configuring System Information
Defining SNMPv3 Views Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 View Settings page.
The following is an example of CLI commands:
Table 6-47. SNMP View CLI Commands
CLI Command Description
snmp-server view view-name
oid-tree {included |
excluded}
Creates or updates a view entry.
show snmp views [viewname] Displays the configuration of views.
Console(config)# snmp-server view user1 1 included
Console(config)# end
Console# show snmp views
Name OID Tree Type
------------- ----------------- --------
user1 iso included
Default iso included
Default snmpVacmMIB excluded
Default usmUser excluded
Default rndCommunityTable excluded
DefaultSuper iso included