57
PQ-8P, PQ-8S
To change the assigned paper tray,
type the respective command
followed by a comma (,) and the
corresponding number of the
chosen paper source.
If you have an HP LaserJet 4 Plus
connected to the PQ-8 and the host
is requesting paper to be fed
through paper drawer #1, the HP
printer would, by default, feed from
the Paper Cassette. To assign the
500-sheet Cassette to the paper
drawer #1 through the setup
software, input 5 (from ESC&l5H, as
found in the printer’s user’s guide)
as the value for Paper Drawer # 1,
or send the Host/PC download
command Z13,5 to the printer.
5.8 Print Orientation
When operating the printer and
printer interface in IBM 3812-1
emulation mode, the print
orientation of the host document or
report is determined by a variety of
factors. These factors are in order of
their impact on the final print
orientation:
1.Page Rotation specified in the
print file of a data processing
document or in the document
format menu of a word
processing document.
2.Automatic Print Orientation
(APO) setting on the printer
interface.
3.Print Orientation setting on
printer interface.
As you read the following
explanation, refer to Figure 5-1
for an illustration of the print
orientation logic.
5.8.1 P
AGE
R
OTATION
Degrees of page rotation can be
specified through the print file of a
data-processing document or in the
document format menu of a word-
processing document. See Section
5.8.4 for a description on how to
access the print file and the
document format menu. The
available settings are 0, 90, 180, 270
degrees and AUTO (AS/400 only).
The print file also offers DEVD and
COR (AS/400 only).
a. With 0, 90, 180, and 270 degrees
you can specify the desired
rotation directly from the host.
b. The COR setting will always
print COR, unless the print
quality (AS/400 and S/38) is set
to NLQ or STD, or Text (S/36)
is set to YES. If the page rotation
is set to COR and print
quality/text is one of the above
mentioned settings, the print job
will print in portrait in the
requested font.
c. With the DEVD and AUTO
settings, the host does not
influence the print orientation.
Rather, the print orientation is
determined by the settings on
the PQ-8.
