724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 59
LGB5028A User‘s Manual
Chapter 6: Configuration
Figure 6-12. The LACP Port Configuration screen.
Parameter Description
Port: The switch port number.
LACP Enabled: Click to enable LACP on this switch port. LACP will form an aggregation when two or more ports are connected
to the same partner. LACP can form a maximum of 12 LLAGs per switch and 2 GLAGs.
Key: The Key value incurred by the port, range 1–65535 . The Auto setting will set the key as appropriate by the physical link
speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the same key
value can participate in the same aggregation group; ports with different keys cannot.
Role: Role shows the LACP activity status. “Active” will transmit LACP packets each second; “Passive” will wait for a LACP packet
from a partner (in other words, it will “speak if spoken to”).
Buttons:
Save: Click to save changes.
