Filter
Top Products
4-7
FRONT WHEEL AND BRAKE DISCS
CHAS
NOTE:
NOTE:
8. Tighten wheel axle pinch bolt
2
, and then
pinch bolt
1
to specified torque.
9. Retighten pinch bolt
2
to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
10. Tap the outer side of the left fork leg with a
rubber mallet to align it with the end of the
wheel axle.
11. Tighten wheel axle pinch bolt
4
, and then
pinch bolt
3
to specified torque.
12. Retighten pinch bolt
4
to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
13. While applying the front brake, push down
hard on the handlebar several times to
check for proper fork operation.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
SAfter replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
SAdjust the front wheel static balance with the
brake discs installed.
1. Remove:
Sbalancing weight(s)
2. Find:
Sfront wheel’s heavy spot
Place the front wheel on a suitable balancing
stand.