Filter
Top Products
4-23
4
TIP
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
WARNING
EWB00350
EBU19181
Auxiliary DC jack
The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
1. Set the light switch to “OFF”.
2. Start the engine. (See page 6-1.)
3. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
1. Special wrench
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
5
POTENTIAL HAZARD
Improper shock absorber assembly adjust-
ment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.
U28P10E0.book Page 23 Thursday, April 10, 2008 9:29 AM