Filter
Top Products
8-29
8
NOTICE
ECB00420
Be sure no foreign material enters the final
gear case.
6. Install the oil level check bolt and oil filler bolt,
and then tighten them to the specified torques.
7. Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
EBU23422
Differential gear oil
The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil level must be
checked and the oil changed as follows at the in-
tervals specified in the periodic maintenance and
lubrication chart.
To check the differential gear oil level
1. Place the ATV on a level surface.
TIP
The differential gear oil level must be checked on
a cold engine.
1. Final gear oil
2. Final gear oil level check bolt
3. Correct oil level
Recommended final gear oil:
See page 10-1.
Tightening torques:
Final gear oil level check bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
U28P10E0.book Page 29 Thursday, April 10, 2008 9:29 AM