Filter
Top Products
8-19
8
To install the panel
1. Place the panel in the original position, and
then install the quick fasteners.
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
3. Install the seat.
1. Panel I
2. Quick fastener
Tightening torques:
Carrier bolt (upper):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (lower):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
U28P10E0.book Page 19 Thursday, April 10, 2008 9:29 AM