Filter
Top Products
8-52
8
EBU24890
Checking and lubricating the cables
The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
WARNING
EWB02120
1. Front axle boot (each side)
1. Rear axle boot (each side)
11
1
1
Recommended lubricant:
Engine oil
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the cable sheaths
become damaged, and cables can also be-
come frayed or kinked, which could restrict
the operation of controls and lead to an acci-
dent or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.
U28P10E0.book Page 52 Thursday, April 10, 2008 9:29 AM