Filter
Top Products
8-34
4. Put a new bulb into position and secure it
in place with the bulb holder.
5. Install the bulb holder cover and head-
light cover.
6. Adjust the headlight beam if necessary.
EBU01089
Headlight beam adjustment
CAUTION:
_
It is advisable to have a Yamaha dealer
make this adjustment.
_
To raise the beam, turn the adjusting screw in
direction
a
.
To lower the beam, turn the adjusting screw in
direction
b
.
1. Adjusting screw (× 2)
WARNING
POTENTIAL HAZARD
The headlight bulb is hot when it is on
and immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
U4XE15.book Page 34 Monday, April 8, 2002 2:19 PM