Filter
Top Products
8-12
When installing the spark plug, always clean
the gasket surface and use a new gasket.
Wipe off any grime from the threads and tight-
en to the specified torque.
EBU00851
Air filter cleaning
NOTE:
_
There is a check hose at the bottom of the air
filter case. If dust or water collects in this
hose, empty the hose and clean the air filter
element and air filter case.
_
1. Check hose
1. Remove the seat. (Refer to page 4-14 for
seat removal and installation procedures.)
2. Remove the air filter case cover.
1. Air cleaner case cover
Tightening torque:
Spark plug:
17.5 Nm (1.75 m·kgf, 12.5 ft·lbf)
U4XE15.book Page 12 Monday, April 8, 2002 2:19 PM