Filter
Top Products
8-17
EBU00312
Front brake pad inspection
Inspect the brake pads for damage and wear.
If the thickness is less than the specified val-
ue, have a Yamaha dealer replace the pads.
1. Brake pad a. Wear limit: 1 mm (0.04 in)
N
O
TE:
The wheels need to be removed to inspect the
brake pads. See page 8-27 for removal proce-
dures.
EBU00313
Rear brake shoe inspection
A wear indicator is provided on the rear brake.
This indicator allows checking of brake shoe
wear without disassembling the brake. Apply
the rear brake and check the position of the in-
dicator. If the indicator reaches the wear limit
line, ask a Yamaha dealer to replace shoes as
a set.
1. Wear indicator 2. Wear limit
U4XE15.book Page 17 Monday, April 8, 2002 2:19 PM