Filter
Top Products
8-10
2. Place the machine on a level place.
3. Place a container under the final gear
case to collect the used oil.
4. Remove the oil filler bolt and the drain
bolt to drain the oil.
1. Drain bolt
5. Install the drain bolt and tighten it to the
specified torque.
6. Fill the final gear case with oil.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
7. Install the filler bolt and tighten to the
specified torque.
8. Check for oil leakage. If oil leakage is
found, check for the cause.
9. Install the final gear case cover.
Tightening torque:
Drain bolt (final gear case):
23 Nm (2.3 m·kgf, 17 ft·lbf)
Recommended oil:
See page 10-2.
Oil quantity:
Periodic oil change:
0.25 L (0.22 Imp qt, 0.26 US qt)
Total amount:
0.27 L (0.24 Imp qt, 0.29 US qt)
Tightening torque:
Filler bolt (final gear case):
23 Nm (2.3 m·kgf, 17 ft·lbf)
U4XE15.book Page 10 Monday, April 8, 2002 2:19 PM