8-22
2. Turn the adjusting nut on the brake cable
to provide a gap of 0–1 mm (0–0.04 in)
between the cam shaft lever and pin.
1. Brake cable adjusting nut a. Gap: 0–1 mm (0–0.04 in)
3. Turn the adjusting bolt until free play
reaches 5–7 mm (0.2–0.3 in) at the lever
pivot.
1. Locknut 2. Adjusting bolt
a. Free play: 5–7 mm (0.2–0.3 in)
4. Tighten the locknut.
U4XE15.book Page 22 Monday, April 8, 2002 2:19 PM