Yamaha XVS13AW(C) Motorcycle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
Right
EAU12400
Dimmer switch /
Set this switch to “” for the high
beam and to “” for the low beam.
EAU12430
Turn signal switch /
To signal a right-hand turn, push this
switch to “”. To signal a left-hand
turn, push this switch to “”. When re-
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
has traveled both about 150 m (490 ft)
and for approximately 15 seconds.
However, the turn signal lights can also
be canceled manually by pushing the
switch in after it has returned to the cen-
ter position.
NOTE:
The self-canceling system only oper-
ates when the vehicle is moving, so that
the turn signal lights will not self-cancel
while you are stopped at an intersec-
tion.
EAU12500
Horn switch “”
Press this switch to sound the horn.
EAU12660
Engine stop switch /
Set this switch to “” before starting
the engine. Set this switch to “” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12710
Start switch “”
Push this switch to crank the engine
with the starter.
CAUTION:
ECA10050
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU41700
The engine trouble warning light will
come on when the key is turned to ON
and the start switch is pushed, but this
does not indicate a malfunction.
EAU42522
SELECT switch /
This switch is used to perform selec-
tions in the odometer, tripmeter and
clock mode of the multi-function meter
unit.
See Multi-function meter unit on page
3-3 for detailed information.
EAU42531
RESET switch
This switch is used to perform selec-
tions in the odometer, tripmeter and
clock mode of the multi-function meter
unit.
See Multi-function meter unit on page
3-3 for detailed information.
1. Engine stop switch /
2. SELECT switch /
3. RESET switch
4. Start switch “”
U3D810E0.book Page 7 Wednesday, July 19, 2006 11:14 AM