Filter
Top Products
Control functions
42
ESU14010
Adjusting the rebound damping force
of the rear shock absorber (RS90GT /
RS90LTGT)
WARNING
EWS00161
Do not turn the remote adjusting dial while
the snowmobile is moving as this could
cause loss of control, an accident, and in-
jury.
NOTICE
ECS00291
Be sure to stop the remote adjusting dial
at a marked position around the dial where
there is a click.
The rebound damping force can be adjusted
by turning the rear shock absorber damping
force remote adjusting dial.
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
ESU13290
Adjusting the compression damping
force of the rear shock absorber
(RST90GT)
The compression damping force can be ad-
justed by turning the adjusting knob.
To increase the compression damping force,
turn the adjusting knob in direction (a). To de-
crease the compression damping force, turn
the adjusting knob in direction (b). NOTICE:
Do not continue to turn the adjusting knob
in direction (a) after it stops. The shock ab-
sorber could be damaged and damping
force adjustments will not be able to be
made. Do not turn the adjusting knob in di-
rection (b) more than click(s). Even if the
adjusting knob is continually turned after
click(s), there will be no change in the
damping force. Be sure to stop the adjust-
ing knob at a position where there is a
click.
[ECS00910]
1. Rear shock absorber damping force remote
adjusting dial
2. Standard position
(b)
(a)
1
2
Rebound damping setting:
Minimum (soft):
11 click(s) in direction (b)*
Standard:
Adjusting dial aligned with standard
position match mark
Maximum (hard):
11 click(s) in direction (a)*
* With the adjusting dial in the standard
position
1. Compression damping force adjusting knob
(a)
(b)
1
U8JA11E0.book Page 42 Monday, June 14, 2010 10:22 AM