Filter
Top Products
Periodic maintenance and adjustment
97
If excessive free play is felt, consult a Yamaha
dealer.
RST90
To adjust the handlebar height
1. Remove the handlebar cover.
2. Loosen the handlebar bolts.
3. Move the handlebar up or down to adjust
the handlebar height to the desired posi-
tion. NOTICE: Make sure that the pro-
jection on the handlebar is not
installed into the area shown.
[ECS00571]
4. Tighten the front handlebar bolts to the
specified torque, and then tighten the
rear handlebar bolts to the specified
torque. NOTICE: Make sure each han-
dlebar holder is installed so that the
smaller gap is facing forward.
[ECS00582]
1. Handlebar cover
1. Handlebar bolt
1. Area where projection cannot be installed
U8JA11E0.book Page 97 Monday, June 14, 2010 10:22 AM