Filter
Top Products
Control functions
17
● a digital speedometer
● a tachometer
● an odometer
● a tripmeter (which shows the distance trav-
eled since it was last set to zero)
● warning indicators (which show engine
trouble, coolant temperature, fuel level, and
oil level warnings)
● indicator lights (which show high beam and
low coolant temperature conditions)
● a warning light (which shows warnings to-
gether with the warning indicators)
● a fuel meter (which shows the fuel remain-
ing in the fuel tank)
● a grip/thumb warmer level indicator (which
shows the grip warmer level or the thumb
warmer level)
After the engine is started, the tachometer
needle makes one sweep, and the low cool-
ant temperature indicator light, the warning
light, and all segments of the meter unit dis-
play come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode “ODO”, and
then push the select/reset button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
Pushing the select/reset button switches the
display between the odometer mode “ODO”
and the tripmeter mode “TRIP” in the following
order:
ODO → TRIP → ODO
To reset the tripmeter, push the select/reset
button for at least 1 second while the tripmeter
is displayed.
ESU10411
High beam indicator light “”
The high beam indicator light comes on when
the high beams of the headlights are switched
on. (See page 24 for headlight beam switch
operation.)
1. Tachometer
2. Low coolant temperature indicator
light “”
3. High beam indicator light “”
4. Warning light “”
5. Warning indicators
6. Meter display
7. Select/reset button
1 2 3 4 65 7
1. Odometer/tripmeter
1
U8HV10E0.book Page 17 Monday, May 16, 2011 1:15 PM